Made from green oak complete with mortice and tenon joints. It comes pre-drilled with pegs. It has a 2.28m high by 1.52m wide opening. It has a total height of 3.35m, a total width of 2.2m and a total depth of 1.5m.
| Weight | 1200 kg |
|---|
Supplied:
All the green oak beams with mortice and tenon joints on the relevant ends, pre-drilled holes and individual labels.
Oak pegs to join.
Plan showing where the pieces go.
You will need the following:
Felt, battens and covering for the roof.
Solid base or holes for posts
Fixings to hold posts in place/ fix to the house.
Timber Delivery Rates for Mainland UK start from: Bench slats - £11.99 Large Timber - £29.99 Double Pallet - £119.99(up to 2.4m) Triple Pallet - £169.00 (up to 3.6m). Green oak is delivered by palletised deliveries on a two day service and the costs are determined by length
Green oak is heavy and will require lifting off the lorry. Please ensure you have necessary equipment or man power to unload the lorry. This may requre more than one person. Our office can adivse on approximate weights
If there are access issues please advise prior to delivery and we can arrange necessary transport although this may occur a sur charge.
We will call before dispatch once the order is ready to orginise a delivery day. We book in all deliveries and Pallet force will call on the day of delivery to give a rough delivery time.
Local delivery can be organised on our flat bed. Please ask for a quote. Hi ab delivery can organised at an additional cost. Please call 01935 822207 option 3 or email timber@yandles.co.uk
All deliveries must be accepted in person or there could be a re delivery fee.
Delivery is available within a 30 mile radius of site. Please phone for a quote on 01935 822207 or email timber@yandles.co.uk
This a two person job for the first hour and a four person job for the second hour.
We started by putting together the base. Each piece is labelled with a number and this corresponds to a piece on the plan. This involved slotting the legs into the cross pieces and securing with pegs. Due to the size of the pieces it is helpful to have two people on the job so that the legs can be held securely whilst the pegs are hammered in. We then stood up each side roughly the correct distance apart and then we put the top members on, adjusting the base to ensure that the distance. This requires one person to hold each side stable and two others to put on the cross pieces. This then needs to be pegged. This created a stable base from which we could put on the apex. We had a forklift with a cage to reach the highest pieces, but two people on ladders (with two more holding the ladders stable)can put on the front and back apexs and one at either end can lift in place the ridge beam and the rafters are light enough for one person to lift.
Finally the pegs can be trimmed back. It is not advised to cut them flush as the green oak shrinks and the pegs to do not and so over a period of time the pegs will be sticking out unevenly as the shrinking isnt even.
You must be logged in to post a review.
Collect in store
This item is available for collection
You can also...
Get help, write a review or share this product...
Reviews
There are no reviews yet.