Long Hole Boring Kit consisting of the following items
The perfect tool for making long, uniform apertures through workpieces on the lathe. Ideal for lampstands, as the hole bored is 5/16”, to accept standard bulb holders.
- Piloted Drive 1″x4 prong 2MT (0142B)
- Hollow Rotating Centre 2MT (HRC2)
- Lip And Spur Drill Bit – Long Series 5/16″ diameter (LSLC516) 610mm (2ft) long
PaulSpringett (verified owner) –
As good as value you can get. Works really well
NickGoodman (verified owner) –
The design of the kit is quite cleaver but the brad point drill seemed to be sharpened with the wrong rake and it would not cut in to the wood. I tried to sharpen it unsuccessfully and have now obtained a long shaft auger style drill bit to use in its place. This is the first item I have bought from Yandles with which I have not been totally happy.
NickGoodman (verified owner) –
The design of the kit is quite cleaver but the brad point drill seemed to be sharpened with the wrong rake and it would not cut in to the wood. I tried to sharpen it unsuccessfully and have now obtained a long shaft auger style drill bit to use in its place. This is the first item I have bought from Yandles with which I have not been totally happy.
Leskew (verified owner) –
All good