This water based sanding sealer gets the job done without the smell associated with solvent based sealers and also with no flammability issues – ideal for asthma suffers and anyone with an aversion to solvent based finishes.
Applied by cloth, brush or spray (our Foam Brushes are especially good with this) the sealer dries in about 5 minutes and can be overcoated with most compatible finishes after about 20 minutes although two hours should be left if using Acrylic Lacquer.
Acrylic Sanding Sealer sands easily with a fine abrasive and is supplied ready for use.
Acrylic Sanding Sealer
|
|
Typical uses |
To seal open pores of timber prior to application of lacquers, waxes or polishes. Once dry lightly sand for a smooth surface. |
Method of application |
Foam Brush, Brush, cloth or spray. |
Drying time |
Within twenty minutes under normal conditions. |
Coverage |
approx. 8-10 m² per litre. |
Compatibility |
Can be used as a basecoat for Acrylic Gloss Lacquer, Acrylic Lacquer, Ebonising Lacquer, Acrylic Satin Lacquer, WoodWax 22, Woodturner’s Stick Wax, Friction Polish. |
Tips |
One coat should be sufficient to seal the piece you are working on. It is not advisable to apply more than one coat, especially when using a ‘hard’ topcoat (i.e. lacquers). Thinning may be required when applying over a large area. |
Thinners |
Water. |
Safety Considerations |
None.(see Safety Data Sheet or warnings on can for full details). |
A water based sanding sealer with an accelerated drying time and easy sanding for use with Acrylic Lacquers and many other finishes, in an easy to use aerosol. Complies with EN71 for use on toys.
Acrylic Sanding Sealer (Aersol)
|
|
Typical uses |
As a base coat for many products (see below). Once dry, lightly sand for a smooth surface |
Method of application |
Aerosol |
Drying time |
5 minutes under normal conditions |
Coverage |
4-5 m² per litre (about 2 – 2.5m² per can) |
Compatibility |
Can be used under any of the Chestnut Acrylic Lacquers, Ebonising Lacquer, WoodWax 22 and Friction Polish |
Tips |
Apply as a thin coat, taking care to avoid runs |
Thinners |
n/a |
Safety Considerations |
Avoid inhalation of spray (see Safety Data Sheet or warnings on can for full details). |
AlanWebb (verified owner) –
Perfect for sealing wood prior to applying wax polish.
DennisFelts (verified owner) –
Exactly what I needed as an acrylic water based sealer prior to acrylic painting or varnishing my model ships