Hampshire Sheen Pro Black Satin Lacquer Spray 400ml

Basic Application:
When used correctly, this lacquer will produce a high strength satin finish that feels silky smooth to the touch. These are the steps we recommend to get started.
– Sand your work down smooth to at least 400 grit and ensure surface is free from dust, grease and moisture;
– Prepare the surface well with a suitable sealer and ensure it has fully dried. We recommend our Pro Spray Sealer when using this product;
– Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
– Avoid breathing spray – Use appropriate PPE and use in a well ventilated area;
– Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two coats is usually sufficient;
– Adding an overcoat of Hampshire Sheen Microcrystalline Wax will provide the piece fingerprint resistance without unduly increasing the level of shine.

DANGER: Contains Hydrocarbons, C9, aromatics, xylene, n-butyl acetate. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May cause respiratory irritation Harmful to aquatic life with long lasting effects. Keep out of reach of children. Do not breathe spray. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local regulations.

Related products