Record Power Banjo for next generation CL3/CL4 Lathe

3 reviews for Record Power Banjo for next generation CL3/CL4 Lathe

1. 

   Rated 4 out of 5

   GrahamMaxwellCox (verified owner) – 24/01/2020

   I bought this banjo with a view to using it on SIEG SC3 lathe, and estimated the size from the 1 inch post and a photos on the net!
   Obviously the banjo is meant to run on a pair of round rails for the advertied lathes, but I have been using it with some success with the smaller lathe the SC3.
   The banjo clamps to the lower edge of the SC3 lathe with a large square washer in place of the bracket supplied. Also as the tool rest was much too high I swapped the supplied tool rest for an evolution post and rest, shortening the post a bit to aid clearance.
   The result is a working tool rest which runs on the lathe rails and functions reasonably well.
   The banjo was worth a punt!

2. 

   Rated 5 out of 5

   HowellLavis (verified owner) – 03/04/2020

   I bought this banjo and converted it after failing to find a banjo for my DML305 lathe. It was a simple job to convert and did an excellent job, I’m very pleased with it.

3. 

   Rated 5 out of 5

   JackArthurAlunEdwards (verified owner) – 16/12/2020

   exactly what I wanted and ordered and great customer service