Planet Light Pull Drive Kit
The light pull drive is a friction drive with steps 2.8mm, 1/4″(6.35mm, 5.8mm, 9.5mm 12.5mm and 15.8mm. Simply slip the blank onto the drive, bring up the tailstock until the blank is supported by the revolving centre, and away you go. The drive is designed to allow plenty of room to work around the light pull, including sanding and finishing.
Available in 1MT or 2MT and includes stepped drill 3mm/6mm x 120mm
Malcolmshelley (verified owner) –
Great product could be stronger as first one I bought broke
RobertBuchanan (verified owner) –
Perfect does what it’s made for and a first class service thank you
Nigel (verified owner) –
I saw Colwin way use one of these (or similar) and I now find it very useful. The 3mm drill portion on the bit is a bit flimsy so sometimes it’s better to use an actual 3mm bit so it’s supported by the Jacobs chuck better otherwise it can “wobble” a bit while cutting into end grain
graemeelliott (verified owner) –
Drill bit broke on 3rd piece of oak which I drilled. Not particularly impressed considering price
AndrewTurner (verified owner) –
Have made many light pulls but it is so much easier with the proper set up
GeorgeHood (verified owner) –
As always, good equipment, great service from purchase to delivery
PeterAlbon (verified owner) –
Overall a useful tool with the exception of the stepped drill, which snaped on the second use, but having lots of drill bits it was not a big problem , but for the cost of the item a better quality bit should be provided
kentett (verified owner) –
Very good