Made from green oak complete with mortice and tenon joints. It comes pre drilled wih pegs. It has a 2.01m high 1m wide opening. It has a total height of 3m, a total width of 1.5m and a total depth of 1.3m.
The kit comes with plans and pegs and is ready to slot together
Please note that green oak can move and the holes securing pegs may need redrilling once put together.
Please note it doesn’t come with the ply back and will require fixing to a wall.
| Weight | 1200 kg |
|---|
Supplied:
All the green oak beams with mortice and tenon joints on the relevant ends, pre drilled hole and individual labels.
Oak pegs to join.
Plan showing where the pieces go.
You will need:
Felt, battens and covering for roof.
Solid base or holes for posts
Fixings to hold posts in place/ fix to house.
Timber Delivery Rates for Mainland UK start from: Bench slats - £11.99 Large Timber - £29.99 Double Pallet - £119.99(up to 2.4m) Triple Pallet - £169.00 (up to 3.6m). Green oak is delivered by palletised deliveries on a two day service and the costs are determined by length
Green oak is heavy and will require lifting off the lorry. Please ensure you have necessary equipment or man power to unload the lorry. This may requre more than one person. Our office can adivse on approximate weights
If there are access issues please advise prior to delivery and we can arrange necessary transport although this may occur a sur charge.
We will call before dispatch once the order is ready to orginise a delivery day. We book in all deliveries and Pallet force will call on the day of delivery to give a rough delivery time.
Local delivery can be organised on our flat bed. Please ask for a quote. Hi ab delivery can organised at an additional cost. Please call 01935 822207 option 3 or email timber@yandles.co.uk
All deliveries must be accepted in person or there could be a re delivery fee.
Delivery is available within a 30 mile radius of site. Please phone for a quote on 01935 822207 or email timber@yandles.co.uk
This a two person job and takes roughly 2 hours to put together. If using ladders a third and fourth person is helpful for putting up the apex to hold the ladders.
We started by putting together the base. Each piece is labelled with a number and this corresponds to a piece on the plan. This involved slotting the legs into the cross pieces and securing with pegs. We then stood up each side roughly the correct distance apart and then we put the top members on, adjusting the base to ensure that the distance. This created a stable base from which we could put on the apex. We had a forklift with a cage to reach the highest pieces, but assuming the base has been fixed to the house then a ladder and a person on either side will be able to slot in the apex at the front and back. As we were not putting a roof on, we put two battens on the top to keep the front and back apexes stable.
You must be logged in to post a review.
This item is available for collection
Get help, write a review or share this product...
Reviews
There are no reviews yet.