Finishing Oil
Finishing Oil is Chestnut’s version of Danish Oil and uses Tung Oil as its base but with the addition of solvents and driers. This aids the drying of the product and speeds it up dramatically, so that it’s dry within eight hours. It has a pale amber colour and dries to a hard yet flexible film which is very hardwearing and water resistant.
For a high gloss finish apply several coats with a light rub down between coats; after 5 or 6 coats a good sheen should be visible.
Finishing Oil is normally applied by cloth but on larger areas a brush can be used very successfully.
Typical uses
A tung-based oil which gives a very hard-wearing finish which is both heat and water resistant. Suitable for turned work, garden furniture, table tops and use in kitchens and bathrooms etc
Method of application
Cloth or brush
Drying time
Approx 4 hours
Coverage
approx. 6-8 m² per litre.
Compatibility
Sealers should not be used with this product. WoodWax 22 may be used on top of this product.
Tips
This product can be used for exterior applications. Conforms to EN71 for use on toys
Thinners
This product should not require thinning but it may thicken with age in which case use White Spirit.
Safety Considerations
Cloths used for application must be laid flat to dry before disposal or kept in a screw capped glass jar (see Safety Data Sheet or warnings on can for full details).
Reviews
There are no reviews yet.