There are three new Trizact belts for sharpening and finishing all types of knife. A Trizact structured belt is different to other abrasive belts. Being arranged in an open form the abrasive allows for a rapid cut, with greater resistance to clogging which in turn means much less friction creating a cooler cut and extended belt life. These new belts are also suitable for sharpening high speed steel turning tools and carbon steel edge and carving tools.
Trizact A6 Belt (approx 3000 grit). Arranged in a pyramid pattern to give a super fine finish. Sharpens to two microns (sharper than a razor blade)
jose luis vallecillo cantalejo (verified owner) –
Measure trzact pe3000t y pe1200t
Thank you very much
Jim Power (verified owner) –
Fantastic belt gives a polished finish to knives, chisels,etc
Penny Lyons (verified owner) –
You know how it goes; you drop a chisel and the tip snaps off. Aye, I did that. Two minutes after I dropped it in the bin I thought to myself “Hey, I need that sized chisel, and I need it now, not after a 40 mile round trip to my nearest DIY store.” So I pulled it out, set up my Pro-Edge with the 600 grit belt, the correct angle on the tool rest, and a dunking pot of cool water. 10 minutes later, after going up through the grits ending with the 3000 grit, I had a wonderfully sharp (if slightly shorter) chisel which pared through the oak door frame like it was butter.
Impressed? Aye, you should be with this Trizact set of belts. Absolutely brilliant and heartily recommended.
Leekeogh (verified owner) –
Great product & fast delivery