Charnwood 8″ Cast Iron Table Saw with Extension Tables

SKU: CHRW619 Category: Table Saws

Rated 3.83 out of 5 based on 6 customer ratings

(6 customer reviews)

Charnwood W619 Cst Iron Saw

£839.99 inc. VAT

Availability: In stock (can be backordered)

Table Saws

Cast Iron Table Saw with an 8″ diameter blade. The 2018 Model is now available with an upgraded quick action precision rip fence.
Quiet Induction Motor Cast Iron Precision Ground Table Extension Tables as Standard Equipment Sliding Carriage as Standard Equipment Separate Hand wheels for Blade Adjustment Quick Action Precision Rip Fence 100mm Dust Extraction Outlet Solid Floor stand Base Included Optional Wheel Kit Available
W619 Table saw is a compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.
Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, cable and plug.
There are 3 ways to configure the table saw:
The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.
If you are not using the sliding carriage, you can fit one extension table on either side of the blade.
For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.
Specification
Main Table Size 530mm x 1000mm
Maximum Ripping Width Using Fence 730mm
Crosscut Table Size 400mm x 180mm
Maximum Crosscutting Width 600mm (700mm Using Reverse Table)
Blade Tilt 90 – 45 degrees
Cutting Depth at 90 degrees 60mm
Cutting Depth at 45 degrees 47mm
Blade Diameter 200mm
Blade Bore 30mm
Work Table Height 860mm
Mitre Guide T-Slot Width 15/19mm
Mitre Guide T-Slot Depth 7mm
Motor (induction) 1100w (1.5hp) / 240v
No-Load Blade Speed 4700 rpm
Minimum Blade Width (Kerf) 2.6mm
Dimensions (WxDxH) 1460 x 1010 x 1030mm
Weight 90Kg
Rating Light Trade
Warranty 1 Year
It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the sawguard and takes it to the single 100mm diameter hose connection point at the back of the machine.
Please note: It is not possible to use a stacked dado set with this saw.

Weight	69 kg

Specification

Main Table Size 530mm x 1000mm

Maximum Ripping Width Using Fence 720mm

Crosscut Table Size 400mm x 180mm

Maximum Crosscutting Width 600mm Blade

Tilt 90 - 45 degrees

Cutting Depth at 90 degrees 60mm

Cutting Depth at 45 degrees 40mm

Blade Diameter 200mm

Blade Bore 30mm

Work Table Height 910mm Motor (induction) 1100w / 240v

Built up dimensions (WxDxH) 1460mm x 1010mm x 1030mm

Weight 69Kg

Rating Light Trade

6 reviews for Charnwood 8″ Cast Iron Table Saw with Extension Tables

Rated 4 out of 5

Ian Summerscales (verified owner) – 29/07/2016

This is my 3rd piece of Charnwood equipment. Although some might say it is quite basic, it does what you would expect from a saw of this size.
It is well built, compact and quiet running. I would recommend it.
Rated 5 out of 5

John Gorman (verified owner) – 04/08/2018

I have been looking for a more refined and accurate replacement for my old “site saw” which has served me well for years. This saw was on offer otherwise I would find it difficult to justify the expense. The saw arrived within two days and the courier was helpful delivering it where it was easy to manipulate it into my workshop. It was extremely well packaged and it was fairly easy to assemble, although the instructions weren’t the best I’ve encountered and could be improved. The saw is much quieter than my old one, it has a smaller blade but cut a selection of 2″ oak with ease and with the precision I was looking for. I have placed the side tables at either side of the cast saw table and have stored the sliding table aside to be used when required. The set up for the saw is easy when a little thought is applied as it would be for any machine. I have used Yandles several times for materials and equipment and have always found their service second to none and will always recommend them.
Rated 1 out of 5

RichardKING (verified owner) – 13/03/2021

Yandles are good, buy the charnwood w619 is low quality kit. Had to get to charnwood to send me broken and rusty replacement kit. Buy a different brand from Yandles rather than this cheaply made Chinese rubbish.
Rated 5 out of 5

SimonMeasday (verified owner) – 24/06/2021

First table saw I have bought and it is just the right size for my small workshop and woodworking. The 20 tooth supplied blade does an excellent job and when you change it for a 60 tooth blade the cuts are out of this world. My shop vac creates more noise than the saw itself. I was worried about the sliding carriage and if would be as useful as it is shown but I would not be without it. The setup was easy and the new instruction booklet is very easy to follow. The fence was accurate as soon as I put it on and the blade needed no adjustment at all. Well packaged and protected and came in three boxes so easy to move from drop off point to the workshop. Delivery driver very helpful and could not do enough to help. Overall if your in the market for a table saw you won’t go wrong with Charnwood. This is my second Charnwood machine and my third delivery from Yandles. A great company that sells quality items.
Rated 5 out of 5

DeanCash (verified owner) – 24/11/2023

Needed a long lasting saw , I have a 9″ x 5″ garage as my workshop , this 8″ sliding table saw is a must .. Game changer for me… A DeWalt site saw are £599 , but the charnwood is worth every penny and more..
Rated 3 out of 5

SteveBull (verified owner) – 30/01/2024

Bought this due to reviews but found two areas of complaint
First off, the insert around the blade is pathetic and makes it very difficult to make a zero clearance plate.
Secondly, dust collection simply doesn’t work. I have a 2.5HP Dust collector yet still most of the sawdust stays in the cabinet or on the floor.