• display as grid Grid
  • display as list List
Page: | 1 | 2 | 3 | 4 |

Tormek SVA-170 Axe Grinding Jig
Tormek SVA-170 Axe Grinding Jig
Key Features Allows both axe bevels to be ground at exactly the same angle Adjustable height for different angles if required Design With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.The rotation of the stone presses the axe firmly into the jig and enhances the...
£17.99 inc VAT
Tormek SVD-110 Tool RestTormek SVD-110 Tool Rest
Tormek SVD-110 Tool Rest
Key Features Easy to adjust Wide plate excellent for sharpening and re-truing a variety of tools Design With the Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools.It has a generous surface, 90×110...
£33.99 inc VAT

Tormek SVH-320 Planer Knife Jig
Tormek SVH-320 Planer Knife Jig
Key Features For regrinding blades and knives of any length Grinds blades identically With the Tormek Planer Blade Attachment SVH-320 you can sharpen HSS planer blades of any length. Also suitable for mitre guillotine blades. With this jig you will always work with sharp planer blades. You do not need to interrupt your work to send them away for sharpening. The jig copes with planer blades...
£189.99 inc VAT
Tormek SVM-00 Small Knife HolderTormek SVM-00 Small Knife Holder
Tormek SVM-00 Small Knife Holder
Tormek Small Knife Holder
£33.99 inc VAT

Tormek SVP-80 Profile Knife Jig
Key Features Sharpens all shapes of moulding knives Face is precision ground Knife held in position with magnet & guiding pins Sharpens all makes and shapes of moulding knives with 24/30/38mm between centres Up to maximum width of 100mm For different distances, extra holes can be drilled Not suitable for knives without holes Design The Tormek Moulding Knife Jig SVP-80 sharpens...
£189.99 £148.99 inc VAT
Tormek SVS-38 Short Tool Jig
Tormek SVS-38 Short Tool Jig
Key Features For short carving tools and chisels Also suitable for power carving tools Design This patented jig was developed for short woodcarving tools, butt chisels and tools for power carvers. The jig has two parallel flanges running on both sides of the Universal Support. The technique achieved with this design ensures that at all times the jig – even when rotated – holds the tool...
£24.99 inc VAT

Tormek SVS-50 Multi JigTormek SVS-50 Multi Jig
Tormek SVS-50 Multi Jig
Key Features Can be used for turning and carving tools Two holders Universal support in horizontal base Design It is not without reason this jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one. With SVS-50 you can sharpen square and skew turning chisels...
£58.99 inc VAT
Tormek SVX-150 Scissor Jig
Tormek SVX-150 Scissor Jig
Key Features For all sizes of scissors and most garden shears Two clamps hold blade securely Design Give your scissors a bite on the Tormek with the SVX-150 jig for scissors. It fits all sorts of scissors from household scissors to heavy garden shears. You can also sharpen pinking scissors that make zigzag cuts in cloth as well as portable electrical hand planer blades. The scissors are...
£50.99 inc VAT

Tormek TNT-808 Woodturner's Accessory KitTormek TNT-808 Woodturner's Accessory Kit
Tormek TNT-808 Woodturner's Accessory Kit
Tormek TNT-808 Woodturner's Accessory Kit This kit contains everything you need to shape and sharpen all your turning tools, including two patented jigs (works like three!), a radiused leather honing wheel, a serious instruction, the appreciated Turning Tool Setter and the Tormek Case to store all your jigs. The jigs are packed in TC-800 Tormek Case with the included TNT-00 Storage Tray. The Tormek...
£319.99 inc VAT
Tormek TT-50 Diamond Truing Device
Tormek TT-50 Diamond Truing Device
Genuine diamonds mounted in holder Used to dress or open grindstones when the stone becomes grooved or glazed Easy to set up Truing Tool TT-50 If your grindstone has become uneven, it is easily fixed with the Tormek Diamond Truing and Dressing Tool TT-50. It will make your stone perfectly round and flat again. Easy feeding across the stone You conveniently feed the diamond cutter across...
£78.99 inc VAT

Tormek TTS-100 Turning Tool Setter
Tormek TTS-100 Turning Tool Setter
Key Features Works irrespective of the stone diameter Enables exact replication of the edge on bowl and spindle gouges, flat and oval skews The Turning Tool Setter TTS-100 is the key to an efficient sharpening of woodturning gouges and skews. It enables you to exactly create and replicate the edge angle on your bowl and spindle gouges as well as on your flat or oval skews with either...
£26.99 inc VAT
Tormek Universal Gouge Jig SVD-186RTormek Universal Gouge Jig SVD-186R
Tormek Universal Gouge Jig SVD-186R
Tormek Universal Gouge Jig SVD-186R Sharpen woodturning tools and carving gouges Offers full control over bevel angle and shape Exact repeatability, every time Takes carving gouges up to 36mm wide Rotation stop for sharpening carving V-tools Takes carving gouges up to 36mm wide Rotation stop for sharpening carving vee tools For evenly ground, superior, longer lasting edges Fits all Tormek machines
£90.99 inc VAT

Tormek US-105 Universal Support fits 2000, 2004, T-7, T-8Tormek US-105 Universal Support fits 2000, 2004, T-7, T-8
Tormek US-105 Universal Support fits 2000, 2004, T-7, T-8
The Universal Support is the basis for all Tormek jigs. US-105 has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth. Fits Tormek T-8, Tormek T-7 and Tormek 2000. The versatile Tormek Universal Support is the basis of the Tormek system. It is made of 12 mm (approx. 1/2") round steel and...
£39.99 inc VAT
Tormek US-430 Universal Support ExtendedTormek US-430 Universal Support Extended
Tormek US-430 Universal Support Extended
Sharpen extra long knives and wide cleavers Micro adjustable for precise setting of edge angles 50mm side extension covers honing wheel Extra height accommodates wide cleavers Fits Tormek T-8/T-7/T-4/T-3 and older Tormek models Length: 436mm, height: 212mm
£79.99 inc VAT

Tormek WM-200 Pro-AnglemasterTormek WM-200 Pro-Anglemaster
Tormek WM-200 Pro-Anglemaster
Key Features Angle setting with pin point accuracy For grindstones of 6° to 10° Angle checking notches This patented AngleMaster has two functions: You can use it to set the jig to the grindstone so that it grinds your tool to any desired edge angle from 10° to 75° and you can use it to measure an existing edge angle on a tool. It is designed to work on any grindstone diameter...
£25.99 inc VAT
Tormek XB-100 Horizontal Base fits all Tormek
Sold Out
Tormek XB-100 Horizontal Base fits all Tormek
Key Features Makes Tormek Supergrind suitable for grinding away from edge Can be mounted on all Tormek models Locks the universal support instantly Upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.
£27.99 inc VAT

Charnwood 6" Bench Grinder Tool Sharpening MachineCharnwood 6" Bench Grinder Tool Sharpening Machine
Charnwood 6" Bench Grinder Tool Sharpening Machine
Bench Grinder / Tool Sharpening Machine
£84.99 inc VAT
Charnwood 8" Bench Grinder Tool Sharpening MachineCharnwood 8" Bench Grinder Tool Sharpening Machine
Charnwood 8" Bench Grinder Tool Sharpening Machine
Bench Grinder / Tool Sharpening Machine
£128.99 inc VAT

Charnwood Cubic Boron Nitride CBN Grinding Wheel 6" / 150mm x 40mm x 32mm Bore  B91 CBN6B91Charnwood Cubic Boron Nitride CBN Grinding Wheel 6" / 150mm x 40mm x 32mm Bore  B91 CBN6B91
Charnwood Cubic Boron Nitride CBN Grinding Wheel 6" / 150mm x 40mm x 32mm Bore B91 CBN6B91
6” (150mm) CBN Wheel CBN6B91 150mm x 40mm x 32mm Bore CBN is an abbreviation for Cubic Boron Nitride. It is an abrasive material. Cubic boron nitride is the second-hardest known material after diamond, making it useful in a wide variety of industrial applications. Recommended Speed: Optimum speed for 6” (150mm) diameter wheel is 1700 to 3000 rpm. Bore Size: The bore is 32mm diameter....
£139.99 inc VAT
Charnwood Universal Tool Sharpening Stand For Sharpening MachinesCharnwood Universal Tool Sharpening Stand For Sharpening Machines
Sold Out
Charnwood Universal Tool Sharpening Stand For Sharpening Machines
Tool Sharpening Stand For Sharpening Machines
£69.99 inc VAT

Diamond Grinding Wheel Dresser 40 x 10mm with HD Coated HeadDiamond Grinding Wheel Dresser 40 x 10mm with HD Coated Head
£11.99 inc VAT
Record Power 8' Bench Grinder Tool Sharpening Machine with 40mm WhitestoneRecord Power 8' Bench Grinder Tool Sharpening Machine with 40mm Whitestone
Record Power 8' Bench Grinder Tool Sharpening Machine with 40mm Whitestone
Buy with confidence - Record Power Price Guarantee!
£109.99 inc VAT

Record Power RPB8 8' Buffing / Polishing Machine with NVR SwitchRecord Power RPB8 8' Buffing / Polishing Machine with NVR Switch
Record Power RPB8 8' Buffing / Polishing Machine with NVR Switch
Buy with confidence - Record Power Price Guarantee!
from £79.99 inc VAT

Diamond Sharpening Stone 4 Sided 150 x 50 x 50mm
Diamond Sharpening Stone 4 Sided 150 x 50 x 50mm
Diamond Sharpening Stone 4 Sided 150 x 50 x 50mm
£26.99 inc VAT
Double Sided Diamond Bench Stone from Trend CraftPro 360g x 600g
£52.99 inc VAT

Faithfull Diamond Sharpening Stone
Faithfull Diamond Sharpening Stone
£74.99 £29.99 inc VAT

Oilstone 200mm & Honing Guide Kit complete with oil and Honing Guide
£18.99 inc VAT

Trend Bench Stone Double Sided Fine/Coarse 6x2x5/16 inch 100g / 300g
£68.99 inc VAT

Trend Carvers Stone Double-Sided Fine/Fine
Trend Carvers Stone Double-Sided Fine/Fine
CARVERS STONE DOUBLE SIDED FINE/FINE
£33.99 inc VAT
Trend Diamond Needle File - 4 Pack - Fine
Trend Diamond Needle File - 4 Pack - Fine
DIAMOND NEEDLE FILE 4 PACK FINE
£38.99 inc VAT

Trend Diamond Stone Cleaning Block / Rubber 42X27
Trend Diamond Stone Cleaning Block / Rubber 42X27
DIAMOND STONE CLEANING BLOCK 42X27
£2.99 inc VAT
TREND FAST TRACK SHARPENER KIT MK2
FAST TRACK SHARPENER KIT MK2
£109.99 £69.99 inc VAT

Trend Honing Compound Leather Strop Tan
Trend Honing Compound Leather Strop Tan
HONING COMPOUND LEATHER STROP TAN
£12.99 inc VAT


Klingspor BULK PACK Aluminium Oxide Sanding Belt Pack for Pro Edge Linisher and Sharpening Systems 1
Klingspor BULK PACK Aluminium Oxide Sanding Belt Pack for Pro Edge Linisher and Sharpening Systems 1
Klingspor Cloth-backed Aluminium Oxide Linisher belt 50 x 780mm pack of 10!
£27.99 inc VAT

Klingspor BULK PACK Ceramic Sanding Belt Pack for Pro Edge Linisher and Sharpening Systems 10pk!
Klingspor BULK PACK Ceramic Sanding Belt Pack for Pro Edge Linisher and Sharpening Systems 10pk!
Klingspor Cloth-backed Ceramic Linisher belt 50 x 780mm pack of 10!
from £33.99 inc VAT
Klingspor BULK PACK Zirconium Sanding Belt Pack for Pro Edge Linisher and Sharpening Systems 10pk!
New lower price
Klingspor BULK PACK Zirconium Sanding Belt Pack for Pro Edge Linisher and Sharpening Systems 10pk!
Klingspor Cloth-backed Zirconium Linisher belts 50 x 780mm pack of 10
from £29.99 inc VAT

NEW Pro Edge Ultimate Sharpening Woodturners Accessory Kit WPEWTKITNEW Pro Edge Ultimate Sharpening Woodturners Accessory Kit WPEWTKIT
New
NEW Pro Edge Ultimate Sharpening Woodturners Accessory Kit WPEWTKIT
For use with the Robert Sorby Pro Edge Sharpening system
£129.99 inc VAT
Re-Launched Robert Sorby Pro Edge Ultimate Sharpening SystemRe-Launched Robert Sorby Pro Edge Ultimate Sharpening System
New
Re-Launched Robert Sorby Pro Edge Ultimate Sharpening System
The ProEdge machine remains the same high quality that you have come to expect from Robert Sorby.
from £389.99 inc VAT

Robert Sorby Honing compound
Robert Sorby Honing compound
Robert Sorby Buffing and Honing compound
£10.99 inc VAT
Robert Sorby PE1200T 1200 Grit Trizact A16 Belt, for ProEdge System
British Made
Robert Sorby PE1200T 1200 Grit Trizact A16 Belt, for ProEdge System
Robert Sorby PE1200T 1200 Grit Trizact A16 Belt, for ProEdge System
£14.99 inc VAT
Page: | 1 | 2 | 3 | 4 |