Grid
List
Record Power 130mm Dovetail Jaws
Record Power 62317 130 mm Dovetail Jaws
Record Power 35mm Standard Jaws
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection.
Expansion: 38 - 58 mm Contraction Spigot: 28 - 47 mm Contraction Square: 16...
Record Power 50mm Standard Jaws
Record Power 62313 50 mm Standard Jaws
Record Power 62327 Pin Jaws with 9 mm Bore
Our new pin jaws have been improved by squaring the external shoulder to allow workpieces to properly register against the back of the jaws. This is ideal for use in expansion, to grip tubes in work pieces such as pepper or salt grinders. We have also reduced the internal diameter to 9 mm, making it ideal for making finials or lace bobbins - Thereby increasing its versatility. This set is ideal for...
Record Power 75mm Heavy Bowl and Gripper Jaws
These new jaws are ideal for heavy bowls and vases. The wide front face provides a good register for the base of the bowl or vase and the deep toothed body provides strong grip on the spigot. The internal gripper can also be used on smaller rough green timber. Also featuring an external dovetail in expansion, it can be used for large platters. A truly versatile and solid jaw set.
Expansion: 81 - 102...
Record Power Long Nose Jaws
These extremely flexible jaws feature internal and external dovetails for bowl work. The deep internal grip is versatile but main benefit of these jaws is to project the work away from the chuck, allowing good tool access to the base of the timber for cleaning and shaping.
Expansion: 54 - 74 mm Contraction Spigot: 38 - 58 mm Contraction Square: 27.5 - 48 mm
Record Power M40 Thread Adaptor Insert To Suit SC Chuck Range - SC1 / SC4
RECORD POWER THREAD ADAPTOR CHUCK INSERTS FOR SC1/SC4
Record Power Mini Spigot Jaws with 13 mm Bore
To complement the new pin jaw, the mini spigot jaws have also been improved. These jaws perform many of the same tasks in expansion and the extra screw hole profiles and added teeth to the outside provide tremendous grip for when this area will not be visible in the finished work piece. This set has been given a 13 mm internal diameter, making it ideal for turning strong spigots on knobs and handles,...
Record Power Pen Jaws
Record Power 62337 Pen Jaws
Record Power Power Grip - 100mm Dovetail and Deep Gripper Jaw
Featuring a specialised dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a deep body and internal teeth to improve versatility. The outer dovetail jaws are ideal for large bowls or platters, particularly when gripping onto a spigot and the deep internal toothed body is ideal...
Record Power Remounting Jaw Fastening Kit
This set of spare fastenings is compatible with the Record Power 62356 Remounting Jaws Mini and 62376 Remounting Jaws Mega. It contains 8 standard profile rubber securing buffers and screws along with 8 longer hex socket screws to allow the remounting jaws to be fixed to the chuck beneath another set of jaws.
Record Power Remounting Jaw-Mega - with Buffer Kit
In response to many requests, we have increased the capacity of our larger remounting jaws, whilst ensuring they can still clear the bed of lathes with the popular 12” swing capacity and are capable of holding 275 mm (10 3/4” ) diameter bowls in contraction mode. Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be...
Record Power Remounting Jaws Mini -up to 200mm Bowl
Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work.
Expansion: 95 - 215 mm Contraction Spigot:...
Record Power RP Plastic Soft Jaws
These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without marking the work piece.
Diameter: 118 - 140 mm Depth: 26 mm
Record Power SC Chuck Fastening Kit Fits SC3 & SC4 Woodturning Chuck
Standard fastenings spares kit for the Record Power SC3 and SC4 chucks. The kit contains 8 hex socket head screws for jaws, 3 and 4 mm hex wrenches and a blind set screw and fibre washer for chuck inserts.
Record Power Dome Jaw Set For Mini Chucks Sc1 / Sc2
Zero clearance for very small spindles and a dome shape
Record Power Mini Faceplate Ring for Sc1 / Sc2
62571 68 mm (2 7/8”) Faceplate Ring
This faceplate ring is ideal for holding small to medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 40 mm jaw set which comes with both the SC1 and SC2 Mini Chucks.
Diameter: 68 mm (2 11⁄16”)
Record Power Pen Jaws for Mini Chuck for Sc1 / Sc2
62305 Pen Jaws
These jaws are perfect for drilling pen blanks, eliminating the need for a drill press and offering much more accurate results because the deep grip to all four sides ensures excellent holding power. Drilling on the lathe means the feed speed of the drill bit is under complete control, so a superior finish can be achieved on a wide range of materials. These jaws are also useful for...
Record Power Pin Jaws For Mini Chuck Sc1 / Sc2
62302 Pin Jaws
Pin jaws are popular in most chuck systems and particularly useful for mini chucking systems. They can clamp small work pieces in contraction but are also useful in expansion for common projects such as salt and pepper mills and tea light holders. The internal diameter is 6 mm, making them ideal for holding the finest of work. They also feature a slight undercut at the base to ensure...
Record Power Standard Jaws for Mini Chuck Sc1 / Sc2
62303 40 mm Standard Jaws
Featuring a specialised dovetail profile in expansion and the superb grip of the hawk beak design on contraction, these versatile jaws are a great all-round set, ideal for small bowl work and also spigot turning. They are supplied as standard with the SC1 and SC2 chucks.
Record Power Coronet Falcon Traditional Woodturning Live Centre British Made 2MT
This live centre features two high-quality sealed-for-life bearings, giving incredibly smooth rotation and the 60º. point is optimised to give the best grip possible from a single point of contact. It is ideal for use on spindle work and can also be used to support headstock-mounted bowls and larger vessels from the tailstock.
Record Power Coronet Falcon Universal Live Centre KIT for Woodturning British Made 2MT
NEW for 2022: Stock January 2022
Record Power Coronet Falcon Universal Live Centre KIT for Woodturning British Made 2M
Record Power Coronet Falcon Woodturning Ring Centre / Cup Point British Made 2MT
This ring centre features two high quality sealed-for-life bearings, giving extremely smooth rotation. The ring design gives a larger area of contact than a traditional live centre for an increased grip. This makes it ideal for supporting small or brittle timbers and works very well with paper-jointed blanks, giving a strong grip to both pieces of timber either side of the joint.
Another great...
Record Power Coronet Hawk 4-Prong Woodturning Drive Centre British Made 2MT
The traditional 4-prong drive centre is designed to give a strong hold to timber using the principle of opposing tooth profiles. The central point of the tool secures the drive centre in place, the four teeth around it grip the timber securely and the opposing tooth pattern ensures the wood fibres
are pulled together to reduce the chance of splitting.
The 22 mm diameter drive centre is ideal for...
Record Power Coronet Hawk 6-Prong Woodturning Drive Centre British Made 2MT
The design of the 6-prong drive centres offers an enhanced grip to timber using the principle of opposing tooth profiles. The central point of the tool secures the drive centre in place, the six teeth around it grip the timber securely and the opposing tooth pattern ensures the wood fibres are pulled together to reduce the chance of splitting. Having two more teeth than the traditional 4-prong drive...
Record Power Coronet Hawk Multi-Tooth Woodturning Drive Centre British Made 2MT
These multi-tooth drive centres feature a ring of teeth around the circumference of the tip, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the
timber.
As the grip is spread across many small teeth rather than 4 or 6 prongs, it is possible to grip...
Crown 245KW 1/4' (6mm) Cryogenic HSS Parting Tool 10' (254mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
Crown 246KW 3/16' (5mm) Cryo Diamond Parting Tool 8 1/2' (216mm) Handle, Black Ash
It has long been understood that by subjecting metal tools to elevated temperatures and then rapidly cooling them, the properties of the metal can be altered. This happens because the crystal structure of the metal is altered to change the way the metal reacts when in use.
The two main crystals in tooling steel are the larger and softer austenite and the smaller, more stable martensite. Through...
essentials 245Y 1/4' (6mm) Parting Tool 8 1/2' (216mm) Handle, Ash No Wallet
245YW 1/4' (6mm) 8 1/2' (216mm) Ash Handle HSS steel blade
essentials 245YW 1/4' (6mm) Parting Tool 8 1/2' (216mm) Handle, Ash
245YW 1/4' (6mm) 8 1/2' (216mm) Ash Handle HSS steel blade
Record Power 3/16' Parting & Beading Tool (12' Handle)
We are proud to introduce the brand new range of turning tools made by Record Power in the UK at our in-house production facility.Mainly used for parting the finished workpiece from the waste wood. With the correct technique they can also be used for creating beads and patterns - a truly useful and essential tool.These tools are manufactured to a standard that makes them perfect for use by demanding...
Robert Sorby 830H 1/8' (3mm) Standard Parting Tool, 8 1/2' (216mm) Handle
Parting tools are primarily used for parting off projects. The thinner section tools are particular beneficial when using the more exotic woods. However, parting tools may also be used to provide thin banded decorations on turnings
Robert Sorby 833H 3/8' (10mm) Beading and Parting Tool, 12' (305mm) Handle
The Beading and Parting Tool is extremely versatile. Its finesse allows for the production of beads whilst it can also be used for conventional parting off. Its more massive section makes it much more rigid and hence it is ideal for making spigots.
Crown 240KW 1/4' (6mm) Cryogenic HSS Bowl Gouge 14' (354mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
Crown 241KW 3/8' (10mm) Cryogenic HSS Bowl Gouge 14' (354mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
Crown 242KW 1/2' (13mm) Cryogenic HSS Bowl Gouge 14' (354mm) Handle, Black Ash
Crown Cryogenic Treatment: please follow this link for more information on these tools
essentials 240FYW 1/4' (6mm) Fingernail Profile Bowl Gouge 14' (354mm) Handle, Ash
240FYW 1/4' (6mm) Fingernail Profile Bowl Gouge 14' (354mm) Handle, Ash HSS steel blade
essentials 241YW 3/8' (10mm) Bowl Gouge 14' (216mm) Handle, Ash No Wallet
3/8' (10mm) Bowl Gouge 14' (354mm) Handle, Ash
Record Power 3/8' Bowl Gouge (16' Handle)
Pre-Order Avaliable July
Robert Sorby 842FLH 1/2' (13mm) Fingernail Bowl Gouge, 14' (354mm) Handle
Now the preference of many experienced turners the bowl gouge with fingernail profile gives greater opportunities. One of the big plusses is that this shape allows pull cuts as there is clearance over the lathe's bed bars. The greater cutting area gives the choice of even heavier wood removal or delicate profiling cuts. nAvailable with or without handle.nFor sharpening we recommend the use of the Robert...
