JET
Grid
List
JET Heavy Duty Dust Collector DC_1100A-M
Air flow rate 1,150/1,620 m3/h
Vaccum pressure 1,700 pA
Dust inlet diameter 150mm
Hose diameter 2×100mm
Motor (V/kW) 230/1.5
Air flow rate (m3/h) 1’150/1’620
Vaccum pressure (pA) 1’700
Dust inlet diameter (mm) 150
Hose diameter (mm) 2 x 100
Filter efficiency with particle size 99% at 30 Micron
Collector bag capacity volume (lt) 200
Collector bag size (mm) 785 x...
JET Two Stage Air Filtration System AFS-400 230V
The new JET AFS-400 Air Filtration unit has been designed with the small to mid-sized shop in mind.Its 260, 362, and 409 CFM rates will clean and circulate the air in a 20’ x 20’ x 8’ shop at a rate of 7 cycles per hour!
To be most compatible with common space restrictions, the JET AFS-400 Air Filtration Unit has rubber feet on its bottom panel so it can be operated while sitting...
JET Two Stage Air Filtration System AFS-500-M 230V
Quiet cleaning and filtering of the air
Filters 98% of all dust particles down to 5 microns and 85% of all particles down to 1 micron
External electrostatic filter and internal filter cartridge, simple to change or clean with careful vacuuming
Volume flow rate can be set to 3 levels: 6 / 8 / 10m 3/min
Waste airflow can be controlled with bladed air vents
Portable with handle
JET 20" Bed Extension for Jet JWL-1440VS, 1640 & 1840 Lathes
500mm bed extension for the Jet JWL-1440VS Woodturning Lathe. Fitting directly onto the bed it offers a useful length extension for spindles etc. When used with the optional JWL-1440VS leg stand, it can be mounted onto the stand to give an extra 400mm diameter over the bed for platter turning. It also comes with a tool post to raise the tool rest to centre height.
Key Features
Cast iron extension...
JET Swing Away Bracket JWL-SA (719001)
Compatibility: Designed to fit JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathesSimple to Use: Quickly swing the lathe tailstock out of the wayEasy Mounting: Securely locks to the lathe bed with a few turns of the handleJET Red Assurance Guarantee: Backed by JET's industry-leading one-year warranty
JET 16" Drum Sander Inc Stand / Optional Table Ext JWDS-1632
Drum speed 1,450rpm
Drum dimensions 127×406mm
Sanding speed 9.5 m/s
Max sanding width 406mm (812mm)
JET 18" Drum Sander Inc Stand / Optional Table Ext JWDS-1836-M
Drum speed 1,450rpm
Drum dimensions 127×457mm
Sanding speed 9.5 m/s
Max sanding width 457mm single
JET 16" Woodworking Bandsaw JWBS-18-M 230v
Wheel diameter 470mm
Max. height/-resaw cap, 406/457mm
Table size 692×508×41mm
JET Planer Thicknesser JPT-10B Includes Stand 230v
Key Features:
Mobile or stationary, robust dressing planer, for use on construction sites and in workshops
Powerful 1.5kW induction motor
18'000rpm ensure top planing results
HSS cutter blocks can be re-sharpened
High-quality thicknessing table and planer for low friction and wear
4-post guide ensures stability and accuracy
Technical details:
Motor (V/kW): 230/1.5
Cutter head...
JET Planer Thicknesser JPT-8B Bench Mounted 230v
Bench mount only
JET Bench Top Router Table Inc NVR Safety Switch JRT-1 Universal Router Compatible
The table is equipped with a safety switch featuring a possibility to connect a router with power up to 1600W.
Table extension (on the left and right side) with 1030 mm in length, router fence with a clear safety guard, table feather board and mitre fence are included.
The JRT-1 is a universal router table & compatible with most routers on the market!
Type: JRT-1
Rating: Hobby
Magnetic Switch:...
JET Variable Speed Scroll Saw 460mm Throat JSS-354V 230v
• Variable speed control in 400-1400 strokes/min.• Takes pin or pinless blades.• Maximum depth of cut 60 mm.• Heavy construction to minimize vibration.• Eyeshield and blower nozzle for safe use.
Sturdy scroll saw JET JSS-354VM for precise cuts without excessive vibration. The saw features a plastic eye shield and worktop blower nozzle for a clean worktop. Pin or pinless blades...
JET Variable Speed Scroll Saw with Tilting Arm 230v JWS-22B
Simple speed setup.
Upper blade holder clamps and tensions blade in one step.
Onboard dust blower for worktop cleanup.
Saw blade tilt to both directions.
Top lift, spring loaded arm raises and stays up until pulled back down.
Material hold down clamp.
Stable cast-iron working surface.
Professional machine combining precision and simplicity of use. Robust design, precise and quick blade setup...
JET Heavy Duty Cast Iron Floor Standing Lathe with Variable Speed JWL-1440VS-M
Variable Speed Lathe 230v
Swing over bed 370mm
Swing over tool rest base 280mm
Centre distance 1,016mm
JET Heavy Duty Cast Iron Floor Standing Lathe with Variable Speed JWL-1840EVS-M 230v
Variable Speed Lathe 230v
Swing over bed 470mm
Swing over tool rest base 360mm
Centre distance 970mm
JET Infeed / Outfeed Tables for JET Drum Sander JWDS - 1632 - 1836 723521
JET Infeed / Outfeed Tables for JET Drum Sander JWDS - 1632 - 1836
