Titebond Original Aliphatic Wood Glue

Product Description

Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.  Physical Properties (Typical) Type Aliphatic resin emulsion Calculated VOC: 10.7 g/LState Liquid Weight/gallon 9.2 lbs.Color Yellow Chalk temperature* Approx. 50°F.Dried film Translucent Flashpoint >200°F.Solids 46% Freeze/thaw stability StableViscosity 3,200 cps pH 4.6Storage life 12 months in tightly closed containers at 75°F *Chalk temperature indicates the lowest recommended temperature at which the glue, air and materialscan be during application, to assure a good bond.  Application Guidelines Application temperature Above 50°F.Open assembly time 5 minutes (70°F./50%RH)Total assembly time 10-15 minutes (70°F./50%RH)Minimum required spread Approximately 6 mils or 250 square feet per gallonRequired clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.   Bond Strength ASTM D-905(On Hard Maple) Temperature Strength psi % Wood FailureRoom Temperature 3,600 77150°F. Overnight 1,600 10  Product Features  Fast set - Shortens clamp time Bonds stronger than wood Excellent heat and solvent-resistance Excellent sandability Unaffected by finishes Versatile - Bonds wood, hardboard, high pressure laminates and particleboard Easy cleanup with water    Limitations Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.  Caution Statement No caution information is needed. Please refer to the Material Safety Data Sheet for further information.View other products in Woodglue »

View other products in PVA Wood glue »