Grid
List
Charnwood Hose Clamp 50mm Diameter
Worm drive hose clamp for securing hose to machinery or fittings
For use with both 50mm and 40mm diameter hoses.
Charnwood Quick connector hose cuff 100mm diameter
Quick Connector: Fits onto the end of a hose and becomes a quick action fitting. Ideal for moving an extractor between several machines with 100mm outlets. Simply screws into the end of our 100FLEX hose and has a tapered fitting at the other end which creates a push-fit with any 100mm outlet on machinery.
100QC is for 100mm diameter hose only.
Please note: The 100QC has a right-handed thread and...
Charnwood Reducing cone 100mm to 125mm
Connector for stepping from 100mm to 125mm.
This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet.
The table below shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector
Charnwood Reducing cone 100mm to 50mm
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.The table shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector.It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted.Using any length of hose of less than...
Charnwood Reducing cone 100mm to 58mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
Charnwood Reducing cone 100mm to 63mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
Charnwood Reducing cone 100mm to 67mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
Charnwood Reducing cone 100mm to 75mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
Charnwood Reducing cone 75mm to 50mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
Charnwood Reducing cone 75mm to 63mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a...
Charnwood Shut off gate with 100mm connections
When more than one hose line has been set up, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line.
Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm hose only.
Charnwood Shut off gate with 125mm connections
When more than one hose line has been set up, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line.
Two 125mm hose clamps are required to fasten the hoses securely to the tapered fitting. For use with 125mm hose only.
Charnwood Stepped Reducing cone 150, 125, 100, 75, 63, 50 & 25mm
A Stepped reducing cone used to step down or up in hose size and used for connecting to machinery with different sized outlets.
This reducer has 7 steps so that any combination of two sizes can be achieved. For example to get a reducer form 125mm (5") down to 75mm (3") it is necesary to cut off the unwanted parts just leaving the middle steps.A hose clamp should be used to fasten hoses to the...
Charnwood T-piece with 3 x 100mm outlets
T shaped branch: To split a hose line into two branches when creating multiple connections. Sometimes the T shape is an advantage when creating a hose network, however the airflow is not as efficient as with the Y shaped branch.
Charnwood Y-piece with 3 x 100mm outlets
Y-Branch: To split a hose line into two branches when creating multiple connections.
Three hose clamps are required to fasten the hoses securely. 100Y for use with 100mm hose only
Inner Cartridge Filter For Vacuum Extractors DC50 / DC50Auto / HA1000 / DX1000 / DE1050 etc
Replacement 0.5micron filter.With normal levels of hobby use, the inner filter should last for a couple of years. Eventually, it will get clogged up and the performance of the extractor will deteriorate. It is very simple to replace, no tools required.Fits over a 125mm diameter air inlet.Filter diameter 180mm diameter x 170mm heightFor use with:
Charnwood W680
Charnwood DC50
Charnwood DC50AUTO
Scheppach...
Large Cloth Pre-Filter for Single Motor HPLV Extractors
Buy with confidence - Record Power Price Guarantee!
Mirka Dustbag Fleece for DE 415/915 5/Pack For L / M - Class Vacs
Product group WAP: DUST EXTRACTORSStatistics group TM02: ACCESSORIES FOR SANDERMirka product code 8999700211EAN product code 6416868924909
NEW Razair MINI Pyrography Smoke Extractor from RazerTip - X60 Primary Filter Expansion Kit XF200!
X60 Primary Filter Expansion Kit XF200!
Outer Paper Filter For Vacuum Extractors (5 pk) Fits DC50 / DC50Auto / DX1000 / De1500 / HA1000 etc
Pack of 5 Replacement outer filter bags.A thick paper-based filter bag which sits over the outside of the cartridge filter to protect it from flying chips. Under normal hobby use, these filters need replacing every 6 months or so. A visual inspection will soon determine if there are any tears in the bag.Tip: By rotating the lid of the extractor round by 90 degrees each time you empty the drum, you...
Record Power 100-61mm Reducer for HPLV Extractors
Buy with confidence - Record Power Price Guarantee!
Record Power 5 Pack Collection Bags for RSDE3 & RDX1500i
Buy with confidence - Record Power Price Guarantee!
Record Power 50-32mm Reducer to Suit BBS1 & BBS2 Bobbin Sander
Buy with confidence - Record Power Price Guarantee!
Record Power Camvac 100-57mm Reducer for HPLV Dust Extractors
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 100mm Dust Extraction Blast Gate
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 100mm Dust Extraction Jubilee Clip
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 100mm Easy Fit Hose Cuff for Dust Extractors
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 120mm Easy Fit Cuff - 100mm (102mm) Thread to 120mm Flexi Cuff
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2.5' Clear Connector (External)
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2.5' Clear Connector (Internal)
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2.5' Hose End (Black) CVA250-23-100
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2.5' Poseable Hose Assembly (670mm long) - Nozzle, Nodes & Adaptor
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Black Plastic Blast Gate
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Black Plastic Wall Clip - Ducting
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Clear Plastic 'T' Fitting
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Clear Plastic 'Y' Fitting
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Clear Plastic Elbow
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Poseable Hose Rectangular Nozzle
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Poseable Hose Vac Adaptor
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' to 1½' Reducer (Black)
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 2½' Wire Hose Clamp
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 4' - 2.5' Flexible Hose Assembly Easy Fit
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 4' Dust Hood (10' Nozzle)
Buy with confidence - Record Power Price Guarantee!
Record Power CamVac 4' Oversized Dust Hood For Mitre Saw
Buy with confidence - Record Power Price Guarantee!